Jump to content


OBJ 140 or T62A?


  • Please log in to reply
8 replies to this topic

ProAryanGamer #1 Posted 05 August 2021 - 04:15 PM

    Corporal

  • Member
  • 4247 battles
  • 44
  • [E_T_B]
  • Member since:
    01-15-2021

Hi guys,

I am currently grinding the OBJ140/T62A line. I am currently on LTTB. Which one is better and why? Please list the pros and the cons of each of the tank and your desicsion. Btw, this is the third line I am grinding. The others were Leo1 and Patton. Also I haven't bought any tier 10s. I have currently researched the Leo1 and M48  patton. Which one should I buy first.



protanker3 #2 Posted 06 August 2021 - 05:50 AM

    Corporal

  • Member
  • 8621 battles
  • 41
  • [WRM]
  • Member since:
    04-14-2020

the t-62 a for gun depression and turret armor the object-140 for troll hull and better mobility. basically the same gun on both

. the choice is yours depends on your playstyle but according to the current meta i would say t-62 a. 



ProAryanGamer #3 Posted 06 August 2021 - 06:35 AM

    Corporal

  • Member
  • 4247 battles
  • 44
  • [E_T_B]
  • Member since:
    01-15-2021

View Postprotanker3, on 06 August 2021 - 05:50 AM, said:

the t-62 a for gun depression and turret armor the object-140 for troll hull and better mobility. basically the same gun on both

. the choice is yours depends on your playstyle but according to the current meta i would say t-62 a. 

Thank you and I would prefer the t62a due to its turret armor. I feel the obj 140 and t62a hull armor are paper.



Lord_Melchett #4 Posted 06 August 2021 - 08:57 AM

    First Lieutenant

  • Member
  • 44947 battles
  • 700
  • [1914]
  • Member since:
    07-12-2016

T62A has been buffed to be better than Obj140 in most aspects.  But they are more similar to each other than to any other tanks.  I wouldn't bother buying both unless you have the other tier 10s already.

 

Between Leo1 and Patton, the Patton is a much more forgiving tank, so better for the new entrant to tier 10.  However, unless you are a very good medium player, you might be better off choosing a heavy or td as your first tier 10.  For a heavy, the IS4 is a good all round tank to start.  For TDs, the Obj 268 is solid.



awesome_guy290 #5 Posted 06 August 2021 - 10:03 AM

    Sergeant

  • Member
  • 4115 battles
  • 209
  • [BOGAN]
  • Member since:
    07-31-2016
Calm down don’t focus on tier X first. Focus on try to improve at the tier you are at, which is VII. Take it easy, play some more tier 7-8, watch some guides, then you will guarantee have a MUCH easier time in tier X no matter the tank.


ProAryanGamer #6 Posted 09 August 2021 - 05:26 AM

    Corporal

  • Member
  • 4247 battles
  • 44
  • [E_T_B]
  • Member since:
    01-15-2021

View Postawesome_guy290, on 06 August 2021 - 10:03 AM, said:

Calm down don’t focus on tier X first. Focus on try to improve at the tier you are at, which is VII. Take it easy, play some more tier 7-8, watch some guides, then you will guarantee have a MUCH easier time in tier X no matter the tank.

Ok i would do that. Thank u



Sam9464 #7 Posted 12 August 2021 - 11:39 PM

    Corporal

  • Member
  • 13944 battles
  • 19
  • [KIWIS]
  • Member since:
    07-26-2017

T62A  vs  Obj.140

 

T62A uses APCR so it has good penetration over distance but is bad at penetrating angled armour  (shell dynamics etc.)

Obj. 140 has AP so has better chances of penetrating angled armour ( IMO not much difference so the T62 has the better gun)

Speed the Obj.140 has 55km vs T62A's 50km.  (not too much difference)

Gun depression:  (6 vs 7) is it THAT important?  7 or 6 is not too good and unless you're hulldown or camping, it does not make too much difference IMO.

IMPORTANT

T62A has a very nice turret, and Obj140's turret is weaker and has 2 big cupolas.  HOWEVER both tank's playstyle is all about moving and shooting (not camping or staying still)  so to hit an Obj's turret requires luck and patience.  

Hull armour: the T62A UFP is 212mm VS Obj's UFP is 230mm.

Side armour: the T62A sides 70mm VS Obj's sides 80mm, 

Armour wise the obj is better for brawling because it's hull is angled everywhere.  Whilst the T62A's hull has Flat armour.

 

T62A = DPB/Hulldown   

Obj.140 = Brawling/1v1 

 

Depends on your playstyle.  (IMO I have both tanks on my NA account and I play the Obj.140 more than the T62A.)

 

M48 VS Leopard 1

Both tanks are a blast to play.

I like M48 better because it suits my playstyle (brawling rushing etc.)

But the Leopard 1 is a very nice tank to play and IMO one of the best tier 10 medium tanks to have.

If I had to pick I would have the M48 because it is a jack of all trades.

 

Leopard 1 = DPM supporter.

M48 = Hulldown or 1v1/Brawling.

 

( BTW M48 is the best medium tank for wreaking Sheridan's. "Ram, Shoot, Bounce his HEAT, Repeat  = FUN" )

 

Your choice, and have fun tanking!


Edited by Sam9464, 16 August 2021 - 12:09 AM.


awesome_guy290 #8 Posted 13 August 2021 - 06:06 AM

    Sergeant

  • Member
  • 4115 battles
  • 209
  • [BOGAN]
  • Member since:
    07-31-2016

Great guide, Sam9464

+1


Edited by awesome_guy290, 13 August 2021 - 06:07 AM.


ProAryanGamer #9 Posted 20 August 2021 - 10:51 AM

    Corporal

  • Member
  • 4247 battles
  • 44
  • [E_T_B]
  • Member since:
    01-15-2021

View PostSam9464, on 12 August 2021 - 11:39 PM, said:

T62A  vs  Obj.140

 

T62A uses APCR so it has good penetration over distance but is bad at penetrating angled armour  (shell dynamics etc.)

Obj. 140 has AP so has better chances of penetrating angled armour ( IMO not much difference so the T62 has the better gun)

Speed the Obj.140 has 55km vs T62A's 50km.  (not too much difference)

Gun depression:  (6 vs 7) is it THAT important?  7 or 6 is not too good and unless you're hulldown or camping, it does not make too much difference IMO.

IMPORTANT

T62A has a very nice turret, and Obj140's turret is weaker and has 2 big cupolas.  HOWEVER both tank's playstyle is all about moving and shooting (not camping or staying still)  so to hit an Obj's turret requires luck and patience.  

Hull armour: the T62A UFP is 212mm VS Obj's UFP is 230mm.

Side armour: the T62A sides 70mm VS Obj's sides 80mm, 

Armour wise the obj is better for brawling because it's hull is angled everywhere.  Whilst the T62A's hull has Flat armour.

 

T62A = DPB/Hulldown   

Obj.140 = Brawling/1v1 

 

Depends on your playstyle.  (IMO I have both tanks on my NA account and I play the Obj.140 more than the T62A.)

 

M48 VS Leopard 1

Both tanks are a blast to play.

I like M48 better because it suits my playstyle (brawling rushing etc.)

But the Leopard 1 is a very nice tank to play and IMO one of the best tier 10 medium tanks to have.

If I had to pick I would have the M48 because it is a jack of all trades.

 

Leopard 1 = DPM supporter.

M48 = Hulldown or 1v1/Brawling.

 

( BTW M48 is the best medium tank for wreaking Sheridan's. "Ram, Shoot, Bounce his HEAT, Repeat  = FUN" )

 

Your choice, and have fun tanking!

Thank you






1 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users